Celotex CF5000, the most recent addition to the organization's "5000" range extends, conveys a U-value inside the mass of 0.18 W/m2K without the need to enlarge the cavity.

Cavity insulation development is still the most common form strategy in the UK, accounting for 70% of the 27.4 million homes worked on. While demonstrating superior protection for cavity divider extends today, assembling experts must strike a balance between execution, expense, and consistency while meeting Building Regulations requirements.

Celotex CF5000 is a BBA-approved premium execution full fill cavity insulation arrangement. Using the entire cavity width, the CF5000 streamlines the warm execution through the insulation and such, achieving lower U-values without the need to broaden the cavity, enhancing the effectiveness of your home's heat retention.

Cavity Insulations are critical to building performance and are mechanically designed with a reduced edge to prevent dampness from entering. If the cavity is enlarged to accommodate thicker insulation, the building's efficiency will suffer. In addition, the requirements for longer cavity wall ties estimated lintels and cavity closers, among other things. These requirements are eliminated by using 97mm thick CF5000 PIR protection in a 100mm cavity.

Composed with establishment proficiency in mind, CF5000 comes in 1200 x 450mm dimensions to fit standard cavity wall tie dispersing and also the ease of cutting. CF5000 also includes a mechanically built discounted edge profile, which ensures that the section of dampness through the insulation is eliminated.

CF5000 is simple to cut and comes in sizes that are compatible with standard cavity wall insulation wall tie dispersing. This new item will alter how we manage Cavity wall construction in the future. We no longer need wider cavities to accommodate the entry of dampness. Celotex CF5000 prevents any approaching dampness by pushing it out to the property's external lea

• Designed specifically for full fill cavitywall applications, the Celotex CF5000 is a high-performance PIR system that is at the forefront of PIR innovation.

• Celotex CF5000 makes use of the entire cavity width, streamlining warm execution through the insulation and achieving a lower U-value without enlarging the cavity.

• Celotex CF5000 PIR Insulation for Full Fill Cavity Walls is made up of foil-faced unbending polyisocyanurate (PIR) froth sheets that can be used as full fill warm protection in new outer brickwork up to 25 meters in stature in residential and non-commercial structures.

• The CG5000, with its low emissivity textured aluminum foil facings, employs a blowing agent with a low atmospheric deviation potential (GWP) and no ozone depletion potential (zero ODP)

BBA testament number 94/3080 ensured

• The product can be used in cavities where it connects the DPC; when installed in accordance with this Certificate, it will oppose any water exchange over the hole to the internal leaf.

• The item is not used as a party wall fire stop to other properties attached as a terraced or apartment-like structure. When used as part of the Certificate setting, it is unlikely to result in lighting inside the cavity. If fire enters the cavity, the amount of air present reduces the risk of ignition.

• In any location, Celotex CF500 should not be taken past flame/fire stops.

• The Celotex CF5000 has a super low lambda of 0.021W/mK, allowing you to meet UK Building Regulations and U-values.

• The CF5000 was designed to reduce dampness passage.

• It has a lower warm conductivity (0.021W/mK).

• Is supported by BBA declaration number 94/3080.

• Has a warm conductivity of 0.021W/mK, providing improved warm execution and significantly higher U-values.

• When installed in accordance with the BRE Green Guide, it receives an A+ rating.

• It has a fire rating of class O.

• Makes installation simple by providing measurements that are compatible with standard cavity wall tie dispersing systems.

• Foil facings on both sides make CF5000 easy to cut.

• A mechanically designed tongue and grooved edge minimizes heat loss through crevices.

The edges of Celotex CF5000 boards are tongue and grooved. This prevents water from entering the inside wall from the outside leaf.

Celotex SW3000 is a new product on the market from Celotex. Everything you need to know about it can be found right here.

When it comes to home insulation, there are so many various types of materials on the market, and each firm seems to claim that theirs is the best.

It can be difficult to get all of the information you need for a certain sort of material since there are so many conflicting claims, biased reviews, and differing viewpoints.

As a result, we've written this post to inform you about the benefits, drawbacks, and valuable small tidbits and tricks that you won't find anywhere else.

In this article, we'll discuss a new Celotex product that was recently released. It's called 'Celotex SW3000,' and it's marketed as an external wall insulation material that's designed for solid walls that can't be insulated with cavity insulation.

Wall insulation, as you may or may not know, is one of the most crucial types of insulation when it comes to fully protecting your home from inclement weather. It ranks second only to roof insulation in terms of comfort, but it should be a top priority if you want to improve the comfort of your living space and possibly avoid being ill as a result of extreme weather.

When a building has hollow walls, or two levels with a void in the middle, insulating material is usually used inside the cavity to prevent heat from escaping. Cavity insulation, on the other hand, is not an option when you have solid walls that have no room between them and are made up entirely of one thick and solid layer. The Celotex SW3000 can be utilized in situations like these.

The Celotex SW3000 is a PIR board developed to improve external wall insulation and provide severe heat protection. The board is covered in a layer of glass tissue facings that are designed to help it maintain the temperature of your room.

One thing to keep in mind is that the Celotex SW3000 material is made with blowing agents with minimal global warming potential and no ozone depletion potential, making it a somewhat environmentally benign substance. For many individuals, this is a major decision factor, as many insulating materials on the market today are not very environmentally friendly. If the negative impact that certain insulating materials have on the environment is something you're concerned about and don't want to promote, the Celotex SW3000 is an alternative you might want to consider for your walls.

However, some consumers may be put off by the fact that this new insulation material is only available in one standard size of 1200 x 600 mm. If this size is appropriate for your needs, you should have no problems with it. If you need more insulation material than this standard size or less insulation material than this standard size, you might be tempted to go with a company that offers a larger range of sizes. Most external wall insulation materials from other manufacturers are also this size, in general.

Despite the dearth of size options, the material is available in a variety of thicknesses. It is available in thicknesses of 50 mm, 80 mm, and 100 mm. This is a significant benefit since it means you may choose the exact thickness that meets your needs without having to go through the hassle of layering the material to make it thicker or thinner.

Another advantage of the Celotex SW3000 material is that it can be installed outside. This indicates that it is mounted on the outside rather than the inside of the walls.

External insulation, as opposed to internal insulation, is typically considered to be the preferable option for solid wall insulation because it does not effect your inside living area. Internal wall insulation is likely to take up some of your living space or make it appear less appealing, which many people find unpleasant. Another advantage is that the Celotex SW3000 is extremely simple to set up.

However, there are certain drawbacks to using the Celotex SW3000 to insulate your outside walls. External wall insulation is more vulnerable to damage since it is exposed to rain, snow, wind, and other elements that can progressively erode the insulation and reduce its effectiveness. In the long run, this may result in higher maintenance costs for the insulation material.

The Celotex SW3000 is not for you if this is not something you want to cope with.

Now, let's speak about how to put this insulation material in place. According to the installation instructions, you must clean, level, fill in any gaps or holes, remove any projections, and clean away debris from the surface you will be installing the insulation on. The temperature in the installation should be around 4 degrees Celsius or greater.

The insulation material's real boards must next be positioned with the perforated side facing outwards and secured using the pre-drilled holes in the material. Each board must have a minimum of five fixes in the center, as well as one in each corner.

All of the boards must be solidly connected, with no gaps between them, and end joints that are tightly butted and staggered.

Finally, a base render coat must be applied, followed by the mesh, and finally the top render coat and finish layer.

That concludes our discussion of the Celotex SW3000. All you have to do now is decide whether it meets your requirements or not!